Code Laboratories

Beginner question - Face tracker quality

2011-12-12T23:51:20Z

Hi All

I am very new to the subject. I have very simple question.
I’ve downloaded CL eye driver form my ps3 eye camera and when I run CL-Eye Test it looks it’s working,
but when I run CLEyeFaceTracker from sdk examples the quality of the picture is far more better!

I thought that sdk examples use the same driver?

How can I achieve the quality from the CLEyeFaceTracker example in my software (I use GazeTracker)

I know I don’t understand probably some very simple thing but I would apriciate if someone can explained it to me.

Thanks

Indices and technologies of green laster pointer are on the world’s level

2011-12-28T08:40:29Z

The methods have the following main categories: under the categories: 1 pulse transmission method such devices as shown in Figure 3 . shown as a total reflector, the device is shown in Figure 6-1. M1 as a total reflector, M2 is shown for the semi-reflecting mirror (R> 50%). electro-optical switch box can be used or Pockels Kerr box form. polarizing prism>% electro-optical switch can be used Pockels or Kerr box form box. mirror and electro-optic modulator electro-optical switch systems, start switch does not work, mirror and electro-optic modulator electro-optical switching system , start switch does not work to maximum polarization transmission, after the pump laser pulse in the cavity and from the formation of mode-locking. oscillator to maximum transmission, the pump laser pulse in the cavity after the formation of the lock from modulus.Hanou 10mW blue violet laser pointer company requires high quality. Vλ / 4 leakage of radiation, focused by the lens, the breakdown spark gap, the radiation leakage from the M2, the lens focus, breakdown spark gap, through the pulse forming network, the high-voltage pulses added to the electro-optic modulator, network, the high-voltage pulse (Vλ / 4) added to the electro-optic modulator, the mode-locked pulse twice through Canada on the electro-optic modulator through the switch, the polarization direction of the rotation., when polarized light is no longer through the polarizer., then polarized light through a polarizer is no longer over switch, the polarization direction of rotation 90, when polarized light is no longer through the polarizer, only the output from the interface on the reflection side, to obtain a single pulse reflected from the interface side to the output, to obtain a single pulse of this approach is that the higher threshold work, cavity components easily damaged, and cavity components and more work the higher the threshold,Hanou 100mW laser pointer company requires high standard. the cavity components easily damaged, and cavity components and more prone to etalon effect, and the leaked serious, poor stability. hygiene standards with effect, and the leaked serious, poor stability. Vλ / 4 2. cavity menu a pulse method the device shown in Figure 3.6-2 in the two orthogonal The polarizing prism between P1 and P2 shown in two orthogonal polarization prism of such a device as shown Pockels put a box (or Kerr box, put a Pockels or Kerr box box ), the mode-locked laser output or a series of short pulses in the Kerr case, when a pulse after a time, as the two orthogonal polarization prism, pulse, when a pulse after a time, as the two orthogonal polarization prism, so the light reflected pulse is polarized lens,Hanou 200mW Laser Pointer company requires high efficiency. the lens focus, breakdown spark gap, the half-wave voltage of λ / 2 rectangular reflective polarizer, the lens focus, breakdown spark gap, the half-wave voltage (Vλ /) rectangular pulse applied electro-optical switch on Pulse added on electro-optical switch. Vλ / 2 electro-optical switch by the next pulse, its polarization rotation, just by being the next pulse by electro-optical switch, the polarization rotation 90, just through the prism of orthogonal polarization , output a single pulse cross polarization prism, output a single pulse. Client is the developing headspring of the green laster pointer enterprise.The choice of pulse sequence in which a pulse, by adjusting the spark gap breakdown power and electro-optical switch by the spark gap to the delay time to achieve. the general election of pulse sequence the maximum pulse energy. between to achieve. general election of the largest energy in the pulse sequence of pulses.

PS EYE and Skype Works Now!

2011-12-03T02:42:19Z

I had done some research and I found a way to make your Ps eye work with skype!
Here is the website, once in download the software of skype. http://www.oldapps.com/skype.php?old_skype=93?download
Steps:
1. Uninstall Skype
2. Once finish uninstalling, Go to the website above and download it.
3. Install it
4. Test it by trying to take a picture with the camera. (wait a few seconds)
I havent actually tried to chat with my friends because they havent gone in but if you guys do, let me know.

How do I match audio and video while recording? Is that possible?

2011-11-29T17:11:48Z

Sorry guys, but I’m very nooby at using CL-Eye, how do you make the video capture to be exact with audio? sometimes the video is too fast or audio is too fast for video. Anyone know?

How do you use multiple cameras?

2010-12-14T06:13:00Z

I have been using AlexP’s PS3Eye driver for a long time now in my weekly live broadcast
(example: http://www.youtube.com/watch?v=KD7yNkcEjd4)

However, I just bought a second PS3Eye because I want to add additional cameras to my broadcast (I eventually want to expand up to four). So I purchased the Platform QUAD pack.

Right now I have 2 cameras hooked up to my computer. They are both installed correctly and the CL-Eye Device Manager has activated them both. Unfortunately, I can’t seem to use the second camera in ANY program. Not Wirecast, not uStream, not Justin.TV, and not even CL-Eye Test! How do I get my computer to recognize both cameras?

I have tried emailing CL support directly, but it looks like they dont give support to anyone unless you bought CL Studio.

Um… Is this free? Costs money? Can I make software and sell it?

2010-03-12T13:00:20Z

I’m confused. I really don’t understand the business model. Is this driver/SDK free? Or do we have to pay for it? If we have to pay for it, how much does it cost and what do we get?

If I make a program that uses it, can I give away that program? Can I sell that program? What do the users of that program have to do?

Just update AVG and it doesn’t like the “CL-Eye Platform SDK”?

2011-09-18T16:17:04Z

Please see attached.

Probably a false positive. Anyone else get this? Any recommendation?

Playstation Eye on Matlab

2011-02-14T11:30:50Z

Hello Everyone,

I am working on a project where I need to use matlab to do some image processing and I want to use the Playstation Eye as my camera but for some reason matlab isn’t recopgnizing the PS eye as a camera.

Please if anyone knows anything that can help.
Please reply ASAP.

Thank you all.

mmmmmmmm

2011-07-02T06:03:52Z

FCK THIS WEBSITE

PlayStation Eye Stock IR blocking filter light spectrum

2011-05-31T13:21:36Z

Hi,

I have a question how wide is the light spectrum on a stock Playstation Eye with the IR blocking filter?

Thanks for any feedback.